ALTIUS SPORTS AVIATOR SUNGLASSES
NOTE: THE GREY STANDARD (NON POLARISED) ALTIUS ARE CURRENTLY OUT OF STOCK. WE APOLOGISE FOR ANY INCONVENIENCE. ALL OTHER VERSIONS SHOWN HERE ARE AVAILABLE.
Rapid Eyewear's British-designed sports aviator sunglasses combine strength, style, comfort and cutting edge lens technology to provide you with the ultimate sunglasses for sports and leisure use. Altius are supplied with a range of lens colours, in polarised and non polarised formats, as follows:
- Red category 2 lenses, non polarised
- Grey category 3 lenses, non polarised
- Red category 3 lenses, polarised
- Grey category 3 lenses, polarised
- Green category 3 lenses, polarised
Altius have a build quality and feature list that makes them outstanding value for money when compared to alternative high-end brands.
Manufactured from a tough nickel-silver alloy, the top quality Altius frame is extremely robust, with sprung side arms and solid hinges that do not exhibit the slop associated with cheaper sunglasses. Adjustable nose pads and rubber side arm extensions enhance comfort levels. Finished in an attractive silver colour.
Utilising Rapid Eyewear's Multi Layer technology, Altius lenses are packed with features. Made from impact resistant polycarbonate, the lenses are finished with a flash mirror coating.
The red category 2 option is ideal for use in fairly bright, changeable or hazy conditions. These sunglasses are also extremely useful for driving when you are dealing with low sun. Category 2 lenses filter less light than standard category 3 lenses - they can be used in bright sunlight too but will be less effective for such conditions. The category 2 lenses have an anti-glare coating on the rear surface, meaning that even without a polarised filter, the levels of glare experienced will be reduced.
All of the category 3 options are for use in regular, bright sunlight. The non-polarised grey option features an anti-glare coating on the rear surface but for the ultimate in glare reduction, we recommend our polarised sunglasses.
Glare is caused by the sun's rays bouncing off horizontal surfaces, including the road, another car's windscreen etc. Polarised lenses remove glare by filtering out this horizontal light. Polarised lenses can be manufactured in one of two ways - cheaper sunglasses have filters stuck on to the front of the lens, and this does work to a large extent but for optimum performance the filters need to be built in to the lenses. Altius has this feature, providing the very best glare reduction possible.
The Altius lenses have a hard coating to make them as scratch resistant as possible. They also benefit from hydrophobic and oleophobic coatings, which resist grease and water.
By filtering blue light from the spectrum, Altius lenses improve depth perception and contrast, making it easier to judge the terrain ahead.
Prescription Options (Grey Lenses Only) We are pleased to offer a range of prescription options for Altius grey polarised and non polarised sunglasses only, up to a maximum SPH strength of plus or minus 4.5. The options are as follows:
- Single-vision (distance correction) non polarised, without flash mirror coating
- Single-vision (distance correction) non polarised, with flash mirror coating
- Bifocal non polarised without flash mirror coating
- Bifocal non polarised with flash mirror coating
- Single-vision (distance correction) polarised, without flash mirror coating
- Single-vision (distance correction) polarised, with flash mirror coating
- Bifocal polarised without flash mirror coating
- Bifocal polarised with flash mirror coating
To add prescription lenses, please select your required option from the drop-down menu at the top of this page, then enter your details in the boxes that appear.
Please note that mirror lenses are not supplied as standard with our prescription options. Also note that the prescription lenses are not supplied with oleophobic or hydrophobic coatings. The non polarised prescription lenses will have an anti glare coating added.
From the date of order it will take around 2 - 3 weeks to complete and ship the sunglasses to you. Orders with the flash mirror coating will take a little longer than the standard options.
Pupillary Distance (PD) This is the distance, in millimetres, between the pupils of your eyes, when measured across the front of your glasses. PD's typically fall in the range of 55 up to 70mm. If you choose to have us make up your prescription sunglasses, we will need to know your PD. Opticians measure PD during an eye test, but they often do not put the result on a prescription card provided to the patient. If you do not know your PD, please ask your optician what it is. Unfortunately, some opticians will not release the measurement and in the UK, they are not obliged to do so.
You can measure your own PD easily. With your regular glasses on, ask someone to hold a ruler up against your glasses and measure off, in millimetres, the distance between the centres of your pupils.
Conformity and UV
Rapid Eyewear sunglasses conform to ISO 12311 and 12312 standards for sunglasses and protective equipment testing. They offer 100% UVA / UVB (UV400) protection and comply with US Z80.3.